STEEL CONSTANT-VELOCITY CENTER DRIVESHAFTS FOR E-MAXX: Both E-Maxx™ and T-Maxx® will benefit from the added strength and performance from these Traxxas steel constant-velocity center driveshafts. The innovative design yields superior durability and long-wearing, low-maintenance running that’s ready for high-torque applications, nitro or electric. Both the front and rear U-joints are lubricated and sealed by a rubber boot to protect against the dirt and grime that cause wear. The ultra-performance look is enhanced by the nickel-plated steel shafts, blue silicone boots, and red-anodized aluminum rings that capture the U-joint pins. Because they are manufactured by Traxxas, you can count on a perfect fit; efficient, smooth running; Traxxas tough durability; and unmatched support. Part 4949R is designed for the T-Maxx 2.5R and T-Maxx 3.3 (models 4902 and 4909 with OptiDrive® transmission). Part 4951R is designed for E-Maxx. Replacement parts service both packages.

Part #4951R Center E-Maxx Driveshafts (steel constant-velocity) front (1)/ rear (1) (assembled with inner and outer dust boots, for E-Maxx)
Suggested retail price $40.00

TRAXXAS CRYSTAL ACCESSORY PACKAGE: Traxxas now offers a package containing crystal holders for transmitters and receivers. The new crystal accessory package from Traxxas includes two receiver crystal holders and a transmitter crystal housing. For easy frequency identification, color coded labels for each of the six 27MHz AM frequencies are included for labeling the transmitter crystal housing.

Part #2030 Crystal holders, transmitter & receiver/ decal sheet
Suggested retail price $2.00

TRAXXAS HIGH-CURRENT CONNECTOR: The patent-pending Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling for real-world use.

Large, textured surfaces on the plug bodies are easy for fingers to grip and the clever reverse-polarity protection makes Traxxas Connectors virtually impossible to plug in backwards. Shrouded wire connections eliminate the extra steps to install heat shrink tubing. Beefy, gold-plated copper terminals with large, spring-loaded contact areas ensure a perfect connection every time. Even after thousands of uses, Traxxas Connectors maintain their precision feel and incredibly low resistance.

Get full details on the product page >>

SPECIAL HOW-TO VIDEO:
Learn how to assemble a Traxxas connector!

Part #3060 Traxxas Connector (male/female) (1)
Suggested retail price $4.25

Part #3070 Traxxas Connector (male) (2)
Suggested retail price $3.75

Part # 3080 Traxxas Connector (female) (2)
Suggested retail price $4.75

TRAXXAS CONNECTOR ADAPTER: Designed to allow chargers with standard Molex connectors to charge batteries equipped with Traxxas High-Current Connectors (#3061). Or, for charging from a charger outfitted with the Traxxas High-Current Connector to an EZ-Start® 7.2V battery pack equipped with a Molex connector (#3062) . Use only in low current applications, not intended for use in vehicles.

Part #3061 Traxxas Connector Adapter, Male/Standard Molex Female (1)
Suggested retail price $5.00

Part # 3062 Adapter, Traxxas Connector Female/Standard Molex Male (1)
Suggested retail price $5.50

DIGITAL HIGH-TORQUE: A monster truck needs a powerful steering servo for responsive performance. The Traxxas digital high-torque, ball bearing servo features precision control, quick response, and incredible torque for increased steering response and control. It has over 50% more torque than the 2055 servo and it's 25% faster! That's 125 oz-in torque, 0.16-second transit speed!

Part #2070 Digital high-torque servo (ball bearing)
Suggested retail price $40.00

WHEELIE BAR (patent pending): The wheelie bar has 4 snap-in adjustment positions that allow you to choose how extreme you want your action to be. The unique design allows it to be easily removed in situations where you may not want the additional control.

Part #4975 Wheelie bar, assembled (fits all Maxx trucks)
Suggested retail price $20.00

Part # 4976 Wheels (4)/ Axles (2), for Maxx wheelie bar
Suggested retail price $4.00

Part #5186A Rubber Tires Mounted on Blue-Anodized Wheelie Bar Wheels (2)/ 5x8mm Ball Bearings (4)/ Axles (2)
Suggested retail price $19.95

Part #5186 Rubber Tires Mounted on Red-Anodized Wheelie Bar Wheels (2)/ 5x8mm Ball Bearings (4)/ Axles (2)
Suggested retail price $19.95

Part #5185 Rubber Tires for Traxxas Wheelie Bar Wheels (2)
Suggested retail price $7.00

SPLIT-SPOKE™ 3.8" SATIN-FINISH WHEELS: (2) (fits Revo/Maxx series)

Part #5172 Wheels, SPLIT-SPOKE 3.8'' (satin) (2)
(fits Revo/Maxx series)
Suggested retail price $10.00

Part #5373 Wheels, Hurricane 3.8" (chrome) (2) (also fits Maxx series)
Suggested retail price $11.00

MAXX MIRROR CHROME WHEELS: Sparkling mirror chrome versions of the original E-Maxx wheels. The wheels feature a chrome-less gluing surface for secure tire bonding.

Part #4972X Maxx Wheel, Chrome (2)
Suggested retail price $10.00

SPORTTRAXX TIRES: Super-soft compound off-road knobby tires with directional and asymmetrical tread pattern. The aggressive, hi-tech tread pattern has angled spikes with sharp gripping edges. Mount 'em for incredible traction. Great for racing your S-Maxx! There is a left and right tire in each package (wheels not included). Rotation direction changes depending upon whether each tire is mounted on the front or the rear. Includes 3-piece contoured inserts.

Part #3970R SportTraxx Tires (2)
Suggested retail price $35.00

LIGHTWEIGHT INPUT SHAFT/DRIVE GEAR ASSEMBLY (18/13 TOOTH TOP GEAR):
Reduce rotating mass inside the E-Maxx transmission by installing this hard-anodized and Teflon®-coated gear cluster and input shaft. Theses accessories may be lighter, but there's no sacrifice in durability.

Part #3993X Lightweight Input Shaft/Drive
Gear Assembly
Suggested retail price $14.50

LIGHTWEIGHT ALUMINUM IDLER GEAR SHAFTS: These shafts are lighter than the stock components they replace, but there's no sacrificing strength because the shafts are hard-anodized. The shafts are also Teflon®-coated for silky smooth operation. Lightweight Aluminum

Part #3995X Idler Gear Shafts
Suggested retail price $3.50

LIGHTWEIGHT OUTPUT/IDLER GEAR SHAFTS:
These shafts are lighter than the stock components they replace, but there's no sacrificing strength because the shafts are hard- anodized. The shafts are also Teflon®-coated for silky smooth operation. Combining this accessory with #3993X and 3995X will provide quicker acceleration and top speed by reducing rotating mass.

Part #3994X Lightweight Aluminum Idler Gear Shafts
Suggested retail price $12.00

BLUE-ANODIZED ALUMINUM BATTERY HOLD-DOWNS: These sharp looking blue-anodized aluminum battery hold downs not only look great installed on the chassis, but they're lighter than the molded pieces they replace. What a great way to add flash to the chassis, while removing some dead weight.

Part #3923X Blue-Anodized Aluminum Battery Hold Downs
Suggested retail price $34.00

CUSTOM MACHINED MOTOR PLATE: This cool-looking, blue-anodized motor plate is thicker than the stock aluminum motor plate for heavy horsepower applications. Special cooling veins are machined into the plate to draw cool air up to the motors.

Part #3990X Custom Machined Motor Plate
Suggested retail price $20.00

MACHINED-STEEL PINION GEARS: Traxxas offers these precision machined 32-pitch gears to allow a variety of gearing options. The machined-steel pinions include set screws and the larger gears are machined to remove unnecessary weight.

Part #3942 12-tooth
Machined-Steel Pinion Gears
Suggested retail price $3.25

Part #3943 13-tooth
Machined-Steel Pinion Gears
Suggested retail price $3.25

Part #3944 14-tooth
Machined-Steel Pinion Gears
Suggested retail price $3.25

Part #3945 15-tooth
Machined-Steel Pinion Gears
Suggested retail price $3.25

Part #3946 16-tooth
Machined-Steel Pinion Gears
Suggested retail price $3.25

Part #3947 17-tooth
Machined-Steel Pinion Gears
Suggested retail price $3.25

Part #3948 18-tooth (Stock)
Machined-Steel Pinion Gears
Suggested retail price $3.50

Part #3949 19-tooth
Machined-Steel Pinion Gears
Suggested retail price $3.50

Part #3950 20-tooth
Machined-Steel Pinion Gears
Suggested retail price $3.50

Part #3951 21-tooth
Machined-Steel Pinion Gears
Suggested retail price $3.50

Part #3952 22-tooth
Machined-Steel Pinion Gears
Suggested retail price $3.50

SPUR GEARS: Traxxas also offers several different 32-pitch spur gears to add more gearing possibilities.

Part #3164 64-tooth
(32-pitch) spur gear
Suggested retail price $3.00

Part #3166 66-tooth
(32-pitch) (Stock) spur gear
Suggested retail price $3.00

Part #4470 70-tooth
(32-pitch) spur gear
Suggested retail price $3.00

Part #4472 72-tooth
(32-pitch) spur gear
Suggested retail price $3.00

ALUMINUM TRANSMISSION SKID PLATE: This transmission skid plate protects the transmission case and provides added support to the molded lower braces. The skid plate is machined from 7075-T6 aluminum to handle serious abuse and it looks fantastic mounted on the chassis thanks to its brilliant blue anodizing. The skid plate includes all of the necessary fasteners and can be installed in seconds.

Part #4947X Aluminum
Transmission Skid Plate
Suggested retail price $18.00

HARD-ANODIZED-ALUMINUM PIVOT BALLS: Our "trick", hard-anodized 7075-T6 aluminum pivot balls are considerably lighter than the stock steel pivot balls, but reducing weight is only one benefit. The hard-anodized pivot balls feature a special Teflon®-coating that reduces friction to make the suspension arms pivot as smooth as possible.

The hard-anodized pivot balls are sold in handy 4-packs that include 4 molded bushing caps to replace your worn out units. Each package of 4 hard-anodized pivot balls will reduce the vehicle's weight by 19-grams. Two packages will reduce over 1-ounce of unsprung weight!

Part #4933X Hard-Anodized-Aluminum
Pivot Balls
Suggested retail price $20.00

ANODIZED-ALUMINUM PIVOT BALL CAPS: Add some extra flash and detail to the E-Maxx wheels with these blue-anodized-aluminum pivot ball caps. The pivot ball caps are CNC machined from 7075-T6 aluminum, so they're actually stronger than the stock units. The pivot ball caps are sold in 4-packs that include 4 new nylon pivot ball bushings.

Part #4934X Anodized-Aluminum
Pivot Ball Caps
Suggested retail price $9.00

ALUMINUM HEX WHEEL HUBS: Replace the stock molded hex wheel hubs with these absolutely bulletproof 6061-T6 aluminum hex hubs. The aluminum hex hubs are CNC machined for the utmost precision and feature machined accents for incredible detail. The aluminum hex hubs will not develop play over time and they clearly stand out every time the wheels are removed from the vehicle.

Part #4954X Aluminum Hex Wheel Hubs
Suggested retail price $20.00

MACHINED-ALUMINUM BULKHEADS: Traxxas machined-aluminum bulkheads increase the strength of Maxx trucks. They provide a super-strong foundation for the suspension and chassis and maximum protection against crash damage. They’re CNC-machined from 6061-T6 aluminum and are anodized-brilliant-blue with machined edges for outstanding detail. *NOTE: Installation requires use of 4939X suspension pins. Do not use stock hinge pins to complete this installation.

Part #4930X Machined-Aluminum
Bulkhead (front)
Suggested retail price $75.00

Part #4929X Machined-Aluminum
Bulkhead (rear)
Suggested retail price $75.00

Part #4939X Suspension pin set, stainless steel (with E-clips)
Suggested retail price $12.00

ALUMINUM BUMPER: Dress up your E-Maxx and add extra crash protection at the same time with these super-tough, 6061-T6 aluminum bumpers. The set includes both front and rear bumpers that are beautifully machined with a brushed aluminum finish. The bumpers can be installed in minuets and include all of the necessary mounting hardware.

Part #4935X Bumpers, 6061-T6
Brushed Aluminum
Suggested retail price $35.00

DIFFERENTIAL SPOOL: This differential spool replaces the differential gears to make the truck unstoppable in hard-core climbing maneuvers. The spool locks the axle, which in turn provides equal power to both wheels no matter what the truck drives over.

If you're building a radical, special-purpose
E-Maxx for straight-line sand drags, hill climbing or pulling, you can replace both the front and rear differentials with spools for total 4WD traction. For racing the E-Maxx on tight off-road tracks, install a spool in the rear diff case to allow the rear end of the truck to slide through the corners. The truck will feel loose, but your lap times will go down.

Part #4981X Differential Spool
Suggested retail price $12.00

ALUMINUM LOWER BRACES: These aluminum lower braces provide the ultimate rigid backbone and maximum protection for the transmission and other components that come through the bottom of the chassis. They're CNC machined from 7075-T6 aluminum and anodized in brilliant electric blue. The edges are machined to a bright finish for extra beauty and detail. Includes all the necessary fasteners.

Part #4923X Chassis Braces,
Lower Machined 7075-T6
Suggested retail price $65.00

Titanium Turnbuckles: Titanium turnbuckles provide a significant weight savings with no loss of strength or durability. The turnbuckles are packaged in pairs and include a handy machined-aluminum adjustment wrench.

Part #2338X Titanium Turnbuckles
(94mm front)
Suggested retail price $15.00

Part #2339X Titanium Turnbuckles
(105mm rear)
Suggested retail price $16.00

SUSPENSION PIN SETS: Designed to upgrade the stock hard chrome screw pins, these stainless steel hinge pins are much stronger than the stock pieces and they fit more precisely too. A titanium suspension pin set is also available for those who like big air jumps and stunts and need extra crash protection.

Installing the titanium suspension pin set will also reduce over one half ounce from the vehicle's weight! Both suspension pin sets include 8 suspension pins and the necessary E-clips to complete the installation.

Part #4939X Suspension Pin Set
(stainless steel)
Suggested retail price $12.00

ALUMINUM BIG BORE SHOCK KIT: Our high-quality aluminum Big Bore shocks are packaged in convenient 8-packs just for E-Maxx enthusiasts. The Big Bore shocks are hard anodized and Teflon®-coated for the smoothest operation possible and they feature internal diaphragms that help keep the air and oil separated for increased performance and longer life between rebuilds.

The shocks are completely assembled and include red, 2.5 rate shock springs, additional shock pistons and clip on pre-load spacers to make ride height and damping adjustments a snap.

Part #4962 Aluminum Big Bore Shock Kit
Suggested retail price $99.99

ALUMINUM SHOCK CAPS: Replace the molded shock caps on your Ultra Shocks with the increased durability and superior sealing of our "trick" aluminum shock caps.

Part #2667 Aluminum Shock Caps
Suggested retail price $7.00

SHOCK REBUILD KIT: The Traxxas shock rebuild kit includes everything that is needed to rebuild two shocks. The package includes silicone o-rings, rubber diaphragms, c-clips and spacers.

Part #2362 Shock Rebuilt Kit
Suggested retail price $2.50

BALL BEARINGS (5x8x2.5mm): Replace the plastic bushings inside of the steering bellcranks with stainless steel ball bearings for the smoothest steering action possible.

Part #2728 Ball Bearings (5x8x2.5mm) (2)
(for steering bellcranks)(2 packages required)
Suggested retail price $8.00

FLAMES DECAL SHEET: This awesome-looking "Flames" decal sheet will let you create a concourse winning body every time. The 6-color flame decals are universal and will fit on just about any Lexan body. The decal sheet includes flames that are designed to fit the hood, roofline and body panels for a truly custom look. Many different Traxxas logos and some rather creative artwork will make your painting project a standout at the track.

Part #3913X Flames Decal Sheet
Suggested retail price $6.00

RACING SPONSORS DECAL SHEET: Dress up the E-Maxx body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different full-scale sponsors including, NOS, Mechanix Wear, Holley, and Hooker headers.

The decal sheet also includes various Traxxas logos including the popular TRAXXAS.COM decals. All the logotypes are faithfully produced with the proper colors and are fully licensed. The high quality flexible vinyl makes it easy to apply the decals over body contours.

Part #2514 Racing Sponsors Decal Sheet
Suggested retail price $3.00

UNIVERSAL WRENCH: This versatile tool features a specially bent shaft that makes accessing certain nuts much easier. One end has a 8mm wrench that fits the E-Maxx wheel nuts. The other end has a 7mm wrench that fits the slipper clutch nut and most 4mm I/D nylon lock nuts.

Part #3980 Universal Wrench
Suggested retail price $2.00

PROGRAPHIX PAINTED BODIES: ProGraphix® bodies are beautifully finished in up to 6 vibrant colors including metallics for a truly custom look. The bodies are completely trimmed and include the body post holes for easy installation on the E-Maxx chassis.

4 different color schemes are available:

Part #3911-2 Red paint scheme
Suggested retail price $39.99

Part #3911-5 Silver paint scheme
Suggested retail price $39.99

Part #3911-6 Blue paint scheme
Suggested retail price $39.99

Part #3911-4 Purple paint scheme
Suggested retail price $39.99

Part #3911X E-Maxx ProGraphix Body (replacement for painted body. Graphics are painted- requires paint and final color application)/window, grill, lights decal sheet
Suggested retail price $34.99

E-MAXX BODY (CLEAR): Perfect for those who want to create their own custom paint job. These bodies are made from .40 inch Lexan for extra ruggedness.

Part #3911 E-Maxx Body (Clear)
Suggested retail price $20.00