Titan® 12-Turn 550 Modified Motor
 The Stampede comes with a powerful Titan 12T 550 modified motor with internal cooling fan. An industry first for this class of truck. The Titan’s over-sized armature (30% larger compared to 540-sized armatures) is equipped with 12-turns of pure copper wire for big torque and increased power-handling capabilities. Lower running temperatures are achieved with the integrated cooling fan. The Titan 12T requires very little maintenance and is designed for consistent torque and high speeds from run to run, without fading.
Beyond the specs, the Titan 12T is made for rock crushing torque, hardcore wheelie launches, explosive jumping, and just about any other 4-wheel fun that demands real horsepower. Be sure to check out the videos to see it in action!
 XL-5 Electronic Speed Control
The XL-5 Electronic Speed Control smoothly supplies power to the motor. This high-performance ESC is packed with impressive specifications that are normally only found on more expensive high-end replacement units. The XL-5 features three throttle profiles, thermal shutdown protection, 4-8 cell compatibility, and built in BEC. High frequency operation combined with ultra-low resistance make the XL-5 an efficient and ultra-smooth fully proportional speed control. An exclusive feature on the XL-5 is the patent pending Training Mode™. This profile reduces the overall power output of the XL-5 by 50% making it easier for young or new drivers to develop their control skills before unleashing full-power operation.
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode™ - 50% Forward / Brake / 50% Reverse (patent pending)
- 12-Turn motor limit for 550 size motors
- 15-Turn motor limit for 540 size motors
- Integrated on/off switch
- Traxxas EZ-Set® one-button setup
- Large heat sink
- High-efficiency MOSFET transistors
 Securely Mounted Electronics
The ESC and receiver are screwed to the chassis for ultimate mounting security. There’s no servo tape to loosen over time with dirt, heat, and collisions.
Gray Parts
 The durable monocoque chassis tub is designed for ultimate ground clearance and is made from the highest quality nylon composites.
Many parts including the chassis, shock bodies, and transmission housing are molded in gray for a fresh tech look.
 Revo®-Spec Torque-Control™ Slipper Clutch
Revo technology is utilized to manage the increased power from the Titan 12T motor. The Torque-Control slipper clutch uses special semi-metallic friction material and finned aluminum alloy pressure plates to dissipate heat and provide consistent traction control. The semi-metallic friction material remains stable across a wide temperature range to provide smooth, linear engagement you can count on, run after run. Spur gears can be removed and replaced without altering the slipper adjustment.
Talon™ 2.8" Pre-Glued Tires with Foam Inserts
 The advanced Talon tread pattern is the same proven design used to provide excellent traction on our highest performing Revo and T-Maxx models! The soft compound rubber hooks up for maximum acceleration and great grip on a wide variety of surfaces: dirt, grass, pavement, and rocks.
The mirror-chrome All-Star™ wheels feature a lightweight horizontal bead that holds the tire to the rim even under extreme rpm. Performance-designed foam inserts are standard and all tires come pre-glued from the factory to get you rolling right out of the box.
Learn more about the available tire and wheel combinations for your Traxxas Stampede here!
 Powder Coated White Springs
White springs feature a new spring rate for more responsive handling and the long-lasting white powder coated finish sets Stampede apart from the pack.
 Included Optional Pinion Gear
The Stampede reaches its blistering 30+mph top speed on-road using the optional 23-tooth pinion gear (included) and a 7-cell 8.4V battery pack (sold separately). Out of the box, the installed 19-tooth pinion gear is just right for all-around, wheelie-popping, off-road action.
 ProGraphix® Bodies
The Stampede's fully trimmed and painted ProGraphix body is available in red, blue, black, and gunmetal. Decals are also applied to save you time and get you driving just minutes out of the box. Traxxas’ ProGraphix bodies are the hottest looking bodies around and are only available on Traxxas Ready-To-Race® models.
New Motor Mount with Cooling Channels
 The sealed gearbox protects the transmission components from dirt and rocks. The molded motor plate now includes finned cooling channels where the motor mounts to the motor plate. The cooling channels work in conjunction with the internal Titan 12T motor fan to pull air through the motor for superior cooling.
 High-Torque Steering Servo
A monster truck needs a powerful steering servo for responsive performance. An included Traxxas high-torque steering servo comes standard for enhanced steering authority and reliability.
Oil-Filled Ultra Shocks™
 Stampede's oil-filled Ultra Shocks utilize X-ring technology for a perfect seal and super-smooth performance. They are fully tunable with a wide range of oils, springs, and pistons. Features include pressure bladders for air/oil separation and spring clips to precisely change the ride height and spring pre-load. They can be renewed in minutes with our inexpensive rebuild kits.
 Magnum 272™ Transmission
The Magnum 272 transmission is assembled with ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears, power is delivered quietly to the durable telescoping U-joint drive shafts. The sealed gearbox protects the transmission components from dirt and rocks. Patent Pending.
Planetary Gear Differential
 The Traxxas planetary gear differential uses hardened steel internal gears for maximum strength during rigorous off-road bashing. This type of differential requires virtually no maintenance and its efficient design puts maximum tire-shredding power to the wheels.
 Fiber Composite Arms
Solid, durable camber links take the guess work out of set-up and are captured to keep you on the trail even when the going gets rough. Captured rod ends provide unmatched durability and they simply won't pop off.
 Monster 4" Ground Clearance
With 4-inches of center ground clearance, the Stampede goes places other trucks can’t! Stampede easily tackles real world obstacles such as tall grass, curbs, and rocks.
 Telescoping Driveshafts
Slider driveshafts are extremely durable, and they allow greater
articulation for increased suspension travel.
 The included TQ radio system includes a high-power transmitter with a specially designed comfort grip, a precise high-torque steering servo, and a compact receiver for up to a quarter-mile range. The perfectly balanced TQ transmitter features servo reversing, a low battery indicator, electronic trim control, and it is digitally proportional for precise steering and throttle control.
 Unmatched Customer Support and Parts Availability
Unparalleled Traxxas support comes standard with every Traxxas model. Traxxas offers the most extensive product support base in the industry and provides unrivaled parts availability. Stampede parts and service are available from a network of nearly 2000 hobby dealers worldwide. Nobody works harder than Traxxas to be accessible to you. We have friendly toll-free phone support that’s available from 8:30am to 9pm central time weekdays, just call 1-888-TRAXXAS. We also offer e-mail support anytime at support@Traxxas.com. Traxxas models are about experiencing total performance and satisfaction, not just in the products, but also with the company that stands behind them.
* With 7-cell battery and included optional 23-tooth pinion gear.
25mph with 6-cell battery and stock installed pinion. |
