 Velineon™ VXL-3s ESC:
- Three Programmable
Drive Profiles:
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode™ - 50% Forward / Brake / 50% Reverse (patent pending)
- Integrated on/off switch
- Traxxas EZ-Set® one-button setup
- Large heat sink
- High-efficiency MOSFET transistors
- Auto-detects brushed, brushless, and sensored brushless motors
- Built-in two-stage low-voltage detection for LiPo batteries.
- NiCad and NiMH battery packs: 4-9 cells (4.8 to 10.8 volts)
- LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)
For more info about the Velineon VXL-3s ESC click here.
 Velineon™ 3500 Brushless Motor:
- Ultra high-temperature sintered Neodymium magnets
- Optimized for power and efficiency in 1/10th scale vehicles
- Consistent, high-power output, run after run
- Low-maintenance, unique Traxxas design
- Efficient, high-speed ball bearings
- Precision-balanced rotor
- Accessible solder tabs
- Protective end cap
- 10-Turn, 3500kV
- Rebuildable
- Hex hardware
- Brilliant blue-anodizing finish
- Silicon steel laminations
- Delivers more power than comparable brushed motors
For more info about the Velineon 3500 Brushless motor click here.
 Traxxas High-Current Connector
Stampede’s Velineon Brushless Power System features the new Traxxas High-Current Connector. Designed to handle high-current applications, the Traxxas Connector effortlessly funnels your battery’s total power to the electronics to keep things running cool and at full power.
For more info about the Traxxas High-Current Connector click here.
 Maxx Cable 12-Gauge Wire
This super-flexible, high-current, low-resistance 12-gauge, wire acts like a series of giant pipes, flowing energy in and out of the electronic speed control. The Traxxas Connector combined with Maxx cable is a better engineered solution for extracting all the power your battery has to give.
Pro-quality, high-grade, metric hex-drive hardware is used throughout for extra strength, and easy maintenance and repair. The black-oxide rust-resistant finish provides a high tech look and feel.
 Rubber-Sealed Ball Bearings
Precision 5x11mm rubber-sealed bearings offer the ultimate in super low-friction performance and maximum protection in dirty environments. They are used in all exposed locations on the truck and are virtually maintenance free.
 Heavy-Duty Hub Carriers & Steering Blocks
Stampede VXL features all new ball bearing front steering blocks and rear hub carriers. They utilize large 5x11mm ball bearings for long-term precision performance, smooth operation, and increased durability.
 Adjustable Steel Turnbuckles
Factory fitted, heavy-duty steel turnbuckles allow camber and toe tuning. Stampede VXL is completely adjustable right out of the box to fine tune handling agility and high-speed performance. Captured rod ends provide unmatched durability and they simply won't pop off.
Talon™ 2.8" Pre-Glued Tires with Foam Inserts
 The advanced Talon tread pattern is the same proven design used to provide excellent traction on our highest performing Revo and T-Maxx models! The soft compound rubber hooks up for maximum acceleration and great grip on a wide variety of surfaces: dirt, grass, pavement, and rocks.
The new black-chrome All-Star™ wheels feature a lightweight horizontal bead that holds the tire to the rim even under extreme rpm. Performance-designed foam inserts are standard and all tires come pre-glued from the factory to get you rolling right out of the box.
 Adjustable Wheelie Bar
Stampede VXL comes equipped with the unique Traxxas adjustable wheelie bar. The patent pending wheelie bar features four position adjustments for wheelie control or for wheelies on command. The wheelie bar mount is constructed of durable composite nylon and it offers an extra level of protection for the motor and transmission case.
 Revo®-Spec Torque-Control™ Slipper Clutch
Revo technology is utilized to manage the increased power from the Velineon 3500 brushless motor. The Torque-Control slipper clutch uses special semi-metallic friction material and finned aluminum alloy pressure plates to dissipate heat and provide consistent yet adjustable traction control. The semi-metallic friction material remains stable across a wide temperature range to provide smooth, linear engagement you can count on, run after run. Spur gears can be removed and replaced without altering the slipper adjustment.
 Included Optional Pinion Gear
Stampede reaches a scorching 65+mph top speed using an optional 30-tooth pinion gear, 83-tooth spur gear, and a 3-cell 11.1V Lithium-polymer battery pack (sold separately). Out of the box, the installed 19-tooth pinion gear is just right for all-around, wheelie popping, on or off-road action.
View the Stampede VXL speed chart for more info.
 Magnum 272™ Transmission
Stampede VXL’s Magnum 272 transmission is assembled with new all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears, power is delivered quietly to the durable telescoping U-joint driveshafts. The sealed gearbox protects the transmission components from dirt and rocks.
 Planetary Gear Differential
The composite Traxxas planetary gear differential now features a steel ring gear with a nylon gear housing for long life. It uses hardened steel internal gears for maximum strength during rigorous off-road bashing. This type of differential requires virtually no maintenance and its efficient design puts maximum tire-shredding torque to the wheels.
 New Yokes with Telescopic Driveshafts
Stampede VXL features new drive yokes which are designed to provide maximum durability to withstand the extreme power of the Velineon Brushless Power System. The slider driveshafts are extremely durable, and they allow greater articulation for increased suspension travel.
 Gray Nylon Composite Parts
The durable monocoque chassis tub is made from highest quality nylon composites and designed for maximum ground clearance. Many parts including the chassis, shock bodies, and transmission housing are molded in gray for a fresh high-tech look.
 Powder Coated White Springs
New white springs feature a race-tuned spring rate for more responsive handling and the long-lasting, white powder coated finish sets Stampede VXL apart from the pack.
 Securely Mounted Electronics
The ESC and receiver are screwed to the chassis for ultimate mounting security. There’s no servo tape to loosen over time with dirt, heat, and collisions.
 ProGraphix® Bodies
Stampede VXL’s fully trimmed and painted ProGraphix body is available in red, blue, black, and silver. Decals are also applied to save you time and get you driving just minutes out of the box. Traxxas’ ProGraphix bodies are the hottest looking bodies around and are only available on Traxxas Ready-to-Race® models.
 Digital High-Torque Steering Servo
A monster truck needs a powerful steering servo for responsive performance. An included Traxxas digital high-torque, ball bearing steering servo comes standard for precision control, quick response, and unmatched torque. It has over 50% more torque than the 2055 it is replacing and it's 25% faster! That's 125 oz-in torque, 0.16-second speed!
Oil-Filled Ultra Shocks™
 Stampede’s oil-filled Ultra Shocks utilize X-ring technology for a perfect seal and super-smooth performance. They are fully tunable with a wide range of oils, springs, and pistons. Features include pressure bladders for air/oil separation and spring clips to precisely change the ride height and spring pre-load. They can be renewed in minutes with our inexpensive rebuild kits.
 Monster 4" Ground Clearance
With 4-inches of center ground clearance, the Stampede goes places other trucks can’t! Stampede easily tackles real world obstacles such as tall grass, curbs, and rocks.
 Suspension Tie Bar
The composite tie bar strengthens the front bulkhead and suspension arms for increased durability.
The included TQ radio system includes a high-power transmitter with a specially designed comfort grip, a precise high-torque steering servo, and a compact receiver for up to a quarter-mile range. The perfectly balanced TQ transmitter features servo reversing, a low battery indicator, electronic trim control, and it is digitally proportional for precise steering and throttle control.
 Unmatched Customer Support and Parts Availability
Unparalleled Traxxas support comes standard with every Traxxas model. Traxxas offers the most extensive product support base in the industry and provides unrivaled parts availability. Rustler parts and service are available from a network of nearly 2000 hobby dealers worldwide. Nobody works harder than Traxxas to be accessible to you. We have friendly toll-free phone support that’s available from 8:30am to 9pm central time weekdays. Just call 1-888-TRAXXAS. We also offer e-mail support anytime at support@Traxxas.com. Traxxas models are about experiencing total performance and satisfaction, not just in the products, but also with the company that stands behind them.
|
