STEEL CONSTANT-VELOCITY DRIVESHAFTS FOR T-MAXX AND REVO MODELS: Traxxas Steel Constant Velocity Driveshafts are designed to handle the extreme horsepower and articulation that a T-Maxx* or Revo can dish-out. The inner and outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive by a lightweight aluminum sleeve so you never have to worry about losing a pin. The nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents not only look good, they are designed to exacting specifications for ultimate strength and performance. These are simply the most advanced steel CV driveshafts available.
*TRX 2.5R/3.3 models only.

COMPLETE KIT:
Part #5451R Driveshafts, Revo/ Maxx (steel constant-velocity)(assembled w/inner & outer dust boots) (for models w/ sealed pivot ball suspension & 3.8'' wheels) (4)
Suggested retail price $80.00

REPLACEMENT PARTS:
Part #5153 Drive cups, inner (2) Revo/ Maxx (for steel constant-velocity driveshafts)/screw pin, M4/15 (2)
Suggested retail price $8.00

Part #5154 Driveshaft, steel constant-velocity, Revo/ Maxx (shaft only, 128.5mm)/ drive cup pin (1)
Suggested retail price $10.00

Part #5166 Stub axle, (1)/ axle sleeve (1) Revo/ Maxx (for steel constant-velocity driveshaft)
Suggested retail price $7.50

Part #5129 Rebuild kit (for Revo/Maxx steel constant-velocity driveshafts) (includes pins, dustboots, and lube for 2 driveshaft assemblies)
Suggested retail price $7.00

RESONATOR™ DYNO-TUNED PERFORMANCE DUAL-CHAMBER PIPE FOR MAXX® TRUCKS: The Traxxas Resonator aluminum tuned pipe for Maxx trucks is specifically engineered to boost performance. It is the ultimate Maxx musclepipe! Traxxas Resonator aluminum tuned pipes are precision-engineered on the dyno to increase the power output of TRX® Racing Engines. The Resonator dual-chamber Maxx pipe (part #5487) provides an average peak torque increase of 16% resulting in brutal bottom end punch. A 10% increase in total power across the whole range provides smooth power delivery, perfect for the back yard or the race track. All Resonator pipes are fully polished to a beautiful mirror-chrome finish with a laser etched logo. Mounting hardware is included.

Part #5487 Tuned pipe, Resonator, R.O.A.R. legal (aluminum, double-chamber) (fits Maxx vehicles with TRX Racing Engines)
Suggested retail price $55.00

TRAXXAS TUBES™ FOR T-MAXX®:
Traxxas now offers patent-pending TUBES™ aluminum turnbuckle toe links for the T-Maxx 2.5R and 3.3. Traxxas TUBES are 30% lighter than the stock steel toe links, plus they’re 4-times stiffer and more than double the strength of aftermarket titanium! These are the strongest toe links you can buy for your T-Maxx. The unique patent-pending hollow tube design maximizes stiffness and resistance to bending, while at the same time reducing weight. Traxxas TUBES are manufactured from high-grade 7075-T6 aluminum and anodized brilliant fire red. To prevent marring the finish, a metric aluminum wrench is included for adjustment. The broad center nut makes it easy to line up the wrench for fast, trackside tuning. A handy machined groove on one end easily identifies the left hand threads.

Part #5141R Maxx toe links (TUBES™ 7075-T6 aluminum, red) (112mm, front) (2) (For Maxx models w/ sealed pivot ball suspension & 3.8” wheels)
Suggested retail price $25.00

Part #5143R Maxx toe links (TUBES™ 7075-T6 aluminum, red) (124mm, rear) (2) (For Maxx models w/ sealed pivot ball suspension & 3.8” wheels)
Suggested retail price $25.00

STEEL CONSTANT-VELOCITY CENTER DRIVESHAFTS FOR T-MAXX: Both E-Maxx™ and T-Maxx® will benefit from the added strength and performance from these Traxxas steel constant-velocity center driveshafts. The innovative design yields superior durability and long-wearing, low-maintenance running that’s ready for high-torque applications, nitro or electric. Both the front and rear U-joints are lubricated and sealed by a rubber boot to protect against the dirt and grime that cause wear. The ultra-performance look is enhanced by the nickel-plated steel shafts, blue silicone boots, and red-anodized aluminum rings that capture the U-joint pins. Because they are manufactured by Traxxas, you can count on a perfect fit; efficient, smooth running; Traxxas tough durability; and unmatched support. Part 4949R is designed for the T-Maxx 2.5R and T-Maxx 3.3 (models 4902 and 4909 with OptiDrive® transmission). Part 4951R is designed for E-Maxx. Replacement parts service both packages.

Part #4949R Center T-Maxx Driveshafts (steel constant-velocity) front (1)/ rear (1) (assembled with inner and outer dust boots, for T-Maxx models w/ OptiDrive transmission)
Suggested retail price $45.00

Part #4949R Rebuild kit (for Revo/Maxx steel constant-velocity driveshafts) (includes pins, dustboots, & lube for 2 driveshafts assemblies)
Suggested retail price $7.00

WHEELIE BAR (patent pending): With the extreme power of the TRX 3.3 on tap, the new adjustable wheelie bar is manditory equipment! The wheelie bar has 4 snap-in adjustment positions that allow you to choose how extreme you want your action to be. In the down position, it keeps the front end of your Maxx truck planted to show off the incredible acceleration possible with the TRX 3.3. Raise the wheelie bar to its full-up position and the action gets wild, with giant wheelies that hang on as long as you keep mashing the throttle… even through second gear! The unique design allows it to be easily removed in situations where you may not want the additional control.

Part #4975 Wheelie bar, assembled (fits all Maxx trucks)
Suggested retail price $20.00

Part # 4976 Wheels (4)/ Axles (2), for Maxx wheelie bar
Suggested retail price $4.00

Part #5186A Rubber Tires Mounted on Blue-Anodized Wheelie Bar Wheels (2)/ 5x8mm Ball Bearings (4)/ Axles (2)
Suggested retail price $19.95

Part #5186 Rubber Tires Mounted on Red-Anodized Wheelie Bar Wheels (2)/ 5x8mm Ball Bearings (4)/ Axles (2)
Suggested retail price $19.95

Part #5185 Rubber Tires for Traxxas Wheelie Bar Wheels (2)
Suggested retail price $7.00

Part #5373 Wheels, Hurricane 3.8" (chrome) (2) (also fits Maxx series)
Suggested retail price $11.00

Part #5470 Tires, SportTraxx racing 3.8" (soft compound, directional and asymmetrical tread design)/ foam inserts (2)
Suggested retail price $35.00

Part # 5471 Tires, Response racing 3.8" (soft-compound, narrow profile, short knobby design)/ foam inserts (2)
Suggested retail price $30.00

7075-T6 MACHINED BILLET CHASSIS: This super heavy-duty CNC machined chassis is much stiffer than the stock chassis but is still lighter weight. The chassis is 4mm thick and machined with strategically placed reliefs for extra weight savings. High quality, blue-anodized 7075-T6 aluminum with bright contrasting machining looks extra sharp on the SportMaxx.

Part #4922X 4mm 7075-T6
Aluminum Chassis
Suggested retail price $85.00

TRX® 3.3 POWERTUNE™ COOLING HEAD: The giant Powertune machined aluminum cooling head promotes even heat distribution for stable engine temps and rock-solid tuning consistency. The newly designed molded head protector is securely fastened to the top of the head with precision hex screws.

Part #5238R: TRX 3.3 PowerTune™ Cooling head, (machined aluminum, blue- anodized), head protector (1), 3x6mm CCS (5)
Suggested retail price $45.00

TRX® 3.3 ENGINE MOUNT: Strengthened engine mount made to withstand punishing TRX 3.3 torque and horsepower.

Part # 5160 TRX 3.3 Engine mount, aluminum/ 3x10 CS with washers (8)
Suggested retail price $11.00

TRX® 3.3 HEAD PROTECTOR: The impact resistant head protector is secured to cylinder head with screws so it won't fall off. It's designed to absorb harsh impacts and to protect your cylinder head from rollovers.

Part # 5228 TRX 3.3 Head Protector, cooling head (1)/3x6mm CCS (5) (TRX 3.3)
Suggested retail price $3.00

TRAXXAS CRYSTAL ACCESSORY PACKAGE: Traxxas now offers a package containing crystal holders for transmitters and receivers. The new crystal accessory package from Traxxas includes two receiver crystal holders and a transmitter crystal housing. For easy frequency identification, color coded labels for each of the six 27MHz AM frequencies are included for labeling the transmitter crystal housing.

Part #2030 Crystal holders, transmitter & receiver/ decal sheet
Suggested retail price $2.00

STAINLESS STEEL & TITANIUM SUSPENSION PIN SET: Designed to upgrade the stock, threaded suspension arm pins, these stainless steel hinge pins are much stronger than the stock pieces and they fit more precisely too. A titanium suspension pin set is also available for those who like big-air jumps and stunts and are looking for extra crash protection. Installing the titanium suspension pin set will also reduce 16g from the vehicle's overall weight! Both suspension pin sets include eight hinge pins and the necessary e-clips to complete the installation.

Part #4939X (stainless Steel),
Suggested retail price $12.00

HARD-ANODIZED ALUMINUM PIVOT BALLS: These trick, hard-anodized 7075-T6 aluminum pivot balls are considerably lighter than the stock steel pivot balls.The hard-anodized pivot balls feature a special Teflon® coating that reduces friction to make the suspension arms pivot as smooth as possible. The pivot balls are sold in 4-packs that include 4 molded bushing caps. Each package of 4 pivot balls will reduce the vehicle’s weight by 19-grams. Two packages will remove over 1-ounce of unsprung weight!

Part #4933X Hard-Anodized Aluminum Pivot Balls
Suggested retail price $20.00

ALUMINUM BIG BORE SHOCK KIT: Our high-quality aluminum Big Bore shocks are packaged in convenient 8-packs just for Maxx Truck enthusiasts. The Big Bore shocks are hard-anodized and Teflon®-coated for the smoothest operation possible and they feature internal diaphragms that help keep the air and oil separated for increased performance. These shocks also include our super smooth, long wearing titanium nitride (TiN) coated shock shafts. The shocks are completely assembled and include red, 2.5 rate shock springs, additional shock pistons and clip on pre-load spacers that make ride height adjustments a snap.

Part #4962 Aluminum Big Bore Shock Kit (8 shocks)
Suggested retail price $99.99

ALUMINUM STEERING/SHIFT SERVO MOUNTS: These aluminum servo mounts add extra strength and stability for the steering and shift servos in your T-Maxx. The servo mounts are CNC machined from 6061 T6 aluminum and are anodized in brilliant-blue for dazzling looks. Bright machined edges add extra detail to your prize ride.

Part # 4918x
Suggested retail price $20.00

ALUMINUM TRANSMISSION SKID PLATES: This transmission skid plate protects the transmission case and provides added support to the molded lower braces. The skid plate is machined from 6061 T-6 aluminum to handle serious abuse and it looks fantastic mounted on the chassis thanks to its brilliant-blue-anodizing. The skid plate includes all of the necessary fasteners and can be installed in minutes.

Part #4947X Aluminum Transmission Skid Plate
Suggested retail price $18.00

ALUMINUM THROTTLE SERVO MOUNTS: These great looking aluminum servo mounts allow you to mount the steering servo more securely, and because they’re machined from 6061-T6 aluminum, they’re incredibly tough. The dazzling blue-anodizing compliments the truck’s other blue-anodized components and they feature machined edges for extra detail.

Part #4919X Aluminum Throttle
Servo Mounts
Suggested retail price $20.00

ALUMINUM HEX WHEEL HUBS: Replace the stock molded hex wheel hubs with our tough 6061-T6 aluminum hex hubs. The aluminum hex hubs are CNC-machined for the utmost precision and feature machined accents for incredible detail. The aluminum hex hubs will not develop play over time and they clearly stand out every time the wheels are removed from the vehicle.

Part #4954X Aluminum Hex
Wheel Hubs
Suggested retail price $20.00

DIFFERENTIAL SPOOL: This differential spool replaces the rear differential gear. The spool locks the axle, providing equal power to both wheels no matter what the truck drives over. If you’re building a T-Maxx for straight-line sand drags, hill climbing or pulling, you can replace the rear differential with a spool for increased 2WD traction.

Part #4981X Differential Spool
Suggested retail price $12.00

Glow Plugs: Traxxas glow plugs are the only plugs that we recommend you run in your TRX Racing Engine. The plugs listed below are direct replacements.

Part #3232 Glow Plug, super duty (medium)
Suggested retail price $5.50

#3232X Glow Plug, super duty (long-medium). Standard replacement for all TRX engines.
Suggested retail price $5.50

* Actual glow plug appearance may vary.

FUEL FILLER BOTTLE: Consider this item a necessity because it facilitates fueling. The fuel bottle holds 500cc of fuel and includes a long, bent, blue-anodized spout for easy filling. A rubber cap and o-ring seal make it possible to temporarily store fuel in the bottle (fuel bottles are not meant for long-term fuel storage).

Part #5001 Fuel Filler Bottle
Suggested retail price $8.00

FUEL BOTTLE REBUILD KIT: Kit includes (2) rubber tube caps and (1) fuel bottle cap. Fits Traxxas fuel bottles.

Part #5001R Fuel Bottle Rebuild Kit
Suggested retail price $2.50

Traxxas Lifetime Engine
Replacement Plan

• Exchange a worn out Traxxas engine for a brand new TRX® Racing Engine; it’s an affordable, convenient, no-questions-asked program.
• Exchanges can be made in your local hobby shop or directly through Traxxas.
• It’s less expensive than rebuilding the engine with separate parts.
• Know that it’s done right. Traxxas replacement engines are brand new (not refurbished) for factory-fresh performance.
• The program uses our top-of-the-line TRX Racing Engine for all exchanges.

Learn More About it!