Showcase  
Nitro 4-Tec Pro  
OverviewSpecsParts ListExploded Views
Gallery Accessories

TRX® PRO.15 ENGINE WITH PULL START: Traxxas' high-torque engine provides the power the Nitro 4-Tec Pro needs to exceed 50mph.

Part #4019 TRX Pro.15 with pull starter
Suggested retail price $140.00

 

ALUMINUM BACKPLATE: The blue-anodized backplate replaces the recoil pull starter on the TRX Pro.15 engine when using a starter box.

Part #4012 Aluminum Backplate
Suggested retail price $15.00

STUB AXLE CARRIERS: These special stub axle carriers remove the toe-in from the rear wheels to allow the Nitro 4-Tec to power slide through turns and achieve higher straight-a-way speeds. (Oilite bushings sold separately)

Part #4354 Stub Axle Carriers, 0-degree (L&R)
Suggested retail price $3.00

 

AIR FILTER INSERTS: Keep the dirt out of the engine with our race-tested 2 and 3-stage, pre-lubed air filter inserts. Be sure to use them when running in extremely dusty environments.

Part #4062 Air Filter Inserts,
2-stage (3 sets)
Suggested retail price $4.95


Part # 4063 Air Filter Inserts,
3-stage (3 sets)
Suggested retail price $4.95

 
WHEEL ADAPTERS (SPACERS): Traxxas wheel adapters allow the use of aftermarket wheels that have different offsets than the Nitro 4-Tec. They can also be used to widen the front or rear end of the vehicle.

Part #4375 Wheel Adapters (4)
Suggested retail price $1.50

Part #1654X-Aluminum blue-anodized
hex wheel hubs
Suggested retail price $9.00
BALL BEARINGS: Stainless steel ball bearings deliver more speed and increase the life of moving parts by reducing friction. Bearings also last longer and require less maintenance than bushings. For steering bellcranks (2 packages required).

Part #2728 Ball Bearings (5x8x2.5mm) (2)
Suggested retail price $8.00
SWAY BARS FRONT & REAR: Front and rear sway bars help reduce chassis roll while cornering for tighter transient steering response. Use them for better control on tracks with tight 'S' curves and switchbacks. Kit comes complete with mounting hardware.

Part #4875 Sway Bars
(front and rear)
Suggested retail price $4.50
HARDENED STEEL DIFFERENTIAL YOKES: Designed to provide extra strength that’s sometimes required when running modified engines on the track.

Part #4628X Hardened Steel Diff Output Yokes (2)
Suggested retail price $19.50
0° LOWER SUSPENSION MOUNTS: Suspension Mounts, Lower (00) Installing the 0-degree front suspension arm mount in place of the stock 3-degree arm mount will provide 0-degrees of front kick up. Dive or anti-dive characteristics can be selected depending on whether or not you use the optional reactive caster wedges installed under the upper suspension mount.

Part #4329 00-Degree Lower Arm Mount (zero kick up)
Suggested retail price $2.50

Part #4330 30-Degree Lower Arm Mount (Stock)
Suggested retail price $2.50
REACTIVE CASTER WEDGES: Install these caster wedges under the upper suspension arm mount for reactive-caster front suspension geometry and lightning-fast steering response.

Part #4334 Reactive Caster
Wedges (2)
Suggested retail price $1.50
4MM BLUE-ANODIZED FLANGE LOCK NUTS: Lightweight and great looking, these blue-anodized-aluminum flange lock nuts are the perfect finishing touch for your serious road racer.

Part #1747X 4mm Blue-Anodized Flanged Lock Nuts (4)
Suggested retail price $5.00
FRONT ALUMINUM PULLEY SHAFT: Lighter than the stock steel pulley shaft, the attractive, blue-anodized 6061-T6 aluminum pulley will reduce rotating mass, which will allow the vehicle to accelerate quicker.

Part #4894X Front Aluminum Pulley Shaft (blue-anodized)
Suggested retail price $7.00
ALUMINUM HEX WHEEL HUBS: Lightweight 6061-T6 aluminum hex wheel hubs fit with greater precision and look awesome installed on the axles. You’ll never have to worry about the axle drive pins stripping these heavy-duty units.

Part #1654X Wheel Hubs, Hex
(blue-anodized-aluminum) (2)
Suggested retail price $9.00
ALUMINUM STUB AXLE CARRIERS (REAR): These lightweight, blue anodized Stub Axle Carriers have the stock 1.5 degree toe in and are machined from 6061-T6 aluminum. These Axle carriers will provide precise handling and suspension response. Install these carriers for extra strength and longevity while improving the look of your car as well.

Part #4352X Stub Axle Carriers,
Rear (1.5 degree toe in) (l&r)
Suggested retail price $Call
ALUMINUM STUB AXLE CARRIERS (FRONT): These lightweight, blue anodized Stub Axle Carriers are machined from 6061-T6 aluminum to provide more precise steering and improved suspension response. Install these carriers for extra strength and longevity while improving the look of your car as well.

Part #4336X Stub Axle Carriers,
Front (l&r)
Suggested retail price $Call
GROOVE ALUMINUM PULLEYS: These 20-tooth pulleys are machined for ultra efficient operation and blue-anodized for dazzling looks.

Part #4895X 20-groove Aluminum Pulleys (blue-anodized)(2)
Suggested retail price $32.00
PRO BALL DIFFERENTIAL: Designed for all-out competition, the Pro Ball Diff features dual ball bearings, metal thrust bearing ring, and carbide differential balls for the smoothest operation possible. Our patented mechanism allows instant trackside adjustment without disassembly.

Part #4840 Pro Ball Differential
Suggested retail price $60.00
GROOVE ALUMINUM PULLEYS: Blue-anodized-aluminum, machine-cut pulleys (front & rear) operate with greater efficiency and are more durable than the stock molded 15-tooth pulleys. They also look fantastic installed on the chassis.

Part #4395X 15-Groove Aluminum Pulleys (blue-anodized)(2)
Suggested retail price $32.00

OPTIONAL GEAR SETS: Use these optional gear sets to fine tune your Nitro 4-Tec’s ratios. The gear ratios must be changed as 1st and 2nd gear sets in order to maintain compatible gear center distances.

Part #4815 15-tooth Clutch Bell
(first gear)
Suggested retail price $6.00

Part #4819 19-tooth Clutch Bell
(second gear)
Suggested retail price $6.00

Part #4887 45-tooth Spur Gear
(first gear)
Suggested retail price $4.00

Part #4888 41-tooth Spur Gear
(second gear)
Suggested retail price $4.00
BIG BORE ALUMINUM SHOCKS: Traxxas Big-Bore shocks provide ultimate dampening control. They’re hard-anodized, Teflon®-coated and have large cylinders for greater oil capacity. Adjustments are a snap with clip-on spring pre-load spacers and installation time is reduced because the shocks are sold pre-assembled.

Part #2658 Aluminum Big Bore Shocks (short) (2)
Suggested retail price $30.00
PRE-GLUED RACING TIRES: These durable Traxxas 2.0 mesh wheels for the Nitro 4-Tec fit all popular on-road touring sedans. They come with superb pre-glued racing tires with contoured molded foam inserts. Their lower profile increases sidewall strength and contact patch. The 10-fork design and realistic aluminum finish will enhance the look of any tourer. Packaged in sets of four for convenience and economy.

Part #4873 Pre-Glued Racing Tires (4)
Suggested retail price $40.00
OFFICIAL TEAM TRAXXAS RACING DECALS: The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start®, Stinger Motors, ProGraphix, TRX® Engines and www.Traxxas.com logos. Perfect for adding that “final touch” to your Traxxas ProGraphix® painted body, or your own personal painting schemes.

Part #9950 Official Team Traxxas Racing Decals
Suggested retail price $4.50
RACING SPONSORS DECAL SHEET: Dress up your model’s body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different full-scale sponsors including, NOS, K&N, Mechanix Wear, Holley, and Hooker headers. The decal sheet also includes various Traxxas logos including the popular TRAXXAS.COM decals. All the logotypes are faithfully produced and are fully licensed. 9" x 4 1/2"

Part # 2514 Racing Sponsors
Decal Sheet
Suggested retail price $3.00
FLAMES DECAL SHEET: This awesome-looking 'Flames' decal sheet will let you create a concourse winning body every time. The 6-color flame decals are universal and will fit on just about any Lexan body. The decal sheet includes flames that are designed to fit the hood, roofline and body panels for a truly custom look. Many different Traxxas logos and some rather creative artwork will make your painting project a standout at the track. 11"x17"

Part #3913X Flames Decal Sheet
Suggested retail price $6.00

TRAXXAS CRYSTAL ACCESSORY PACKAGE: Traxxas now offers a package containing crystal holders for transmitters and receivers. The new crystal accessory package from Traxxas includes two receiver crystal holders and a transmitter crystal housing. For easy frequency identification, color coded labels for each of the six 27MHz AM frequencies are included for labeling the transmitter crystal housing.

Part #2030 Crystal holders, transmitter & receiver/ decal sheet
Suggested retail price $2.00
Temperature Gauge
The Traxxas On-Board Temp Gauge features a loop probe end which can be used on any engine, a large LCD screen, on/off button for longer battery life, a min/max temp button, a Centigrade/Fahrenheit button, and a clear Lexan splash guard. Use it as a precise tuning guide by constantly monitoring your engine temperature.

Part #4091 Temperature Gauge
Suggested retail price $24.99
GLOW PLUG WRENCH: This versatile tool features a specially bent shaft that makes accessing certain nuts much easier. One end has a 8mm wrench that fits standard glow plugs and the T-Maxx wheel nuts. The other end has a 7mm wrench that fits the slipper clutch nut and most 4mm I/D nylon lock nuts.

Part #3980 Glow Plug Wrench
Suggested retail price $2.00
fuel TRAXXAS TOP FUEL®: Top Fuel is the best choice for use in Traxxas cars and trucks delivering power, tuning ease, and protection you can count on. Traxxas Top Fuel is quality blended with the best ingredients to protect our engines and our reputation! New Power Plus™ blend features superior additives such as a non-foaming agent for consistent running and a wetting agent to improve engine lubrication. Plus, high-performance antioxidants and rust inhibitors virtually eliminate the need for after run oil.

Part #5010 Traxxas Top Fuel 10% (quart)
Suggested retail price $11.75

Part #5020 Traxxas Top Fuel 20% (quart)
Suggested retail price $14.75

Part #5030 Traxxas Top Fuel 33% (quart)
Suggested retail price $18.00

Part #5060 Traxxas Top Fuel 10% (gallon)
Suggested retail price $31.00

Part #5070 Traxxas Top Fuel 20% (gallon)
Suggested retail price $41.50

Part #5080 Traxxas Top Fuel 33% (gallon)
Suggested retail price $51.05
plugs

Glow Plugs: Traxxas glow plugs are the only plugs that we recommend you run in your TRX Racing Engine. The plugs listed below are direct replacements.

Part #3232 Glow Plug, super duty (medium)
Suggested retail price $5.50

#3232X Glow Plug, super duty (long-medium). Standard replacement for all TRX engines.
Suggested retail price $5.50

* Actual glow plug appearance may vary.

FUEL FILLER BOTTLE: Consider this item a necessity because it facilitates fueling. The fuel bottle holds 500cc of fuel and includes a long, bent, blue-anodized spout for easy filling. A rubber cap and o-ring seal make it possible to temporarily store fuel in the bottle (fuel bottles are not meant for long-term fuel storage).

Part #5001 Fuel Filler Bottle
Suggested retail price $8.00

 

 

FUEL BOTTLE REBUILD KIT: Kit includes (2) rubber tube caps and (1) fuel bottle cap. Fits Traxxas fuel bottles.

Part #5001R Fuel Bottle Rebuild Kit
Suggested retail price $2.50

FOAM AIR FILTER OIL: The formula for Traxxas foam air filter oil is specially made for filtration, not lubrication. It's extra-sticky to trap extremely small particles of dust and dirt in the foam element. Traxxas foam air filter oil is much more effective than standard oils which were never intended to be used for filtration.

Part #5263 Foam Air Filter Oil
Suggested retail price $4.99