Traxxas
Upgrading the 1/16 Slash VXL 4WD
TQi System 2-channel with 5 ch RX

TQi System 2-channel with 5 ch RX
$67.50

Just switch on and drive with the NEW Traxxas TQi 2.4GHz radio system! With Traxxas spread-spectrum technology, there's no need to check what frequency other drivers are on, or worry about interference from other transmitters. The 2.4GHz circuitry automatically locates and locks onto an open frequency each time you switch it on. The exclusive Traxxas Link™ automatic model recognition software is a breakthrough in "model memory" that makes it easier than ever to enjoy multiple Traxxas Link enabled models without juggling transmitters or scrolling through complex menus searching for model names. Each time the transmitter is bound to a new receiver, it saves that receiver in its memory, along with all the model settings assigned to that receiver. The next time that transmitter and any previously bound receiver (up to 30!) are switched on, the transmitter automatically recalls the settings for that receiver. Just power up the transmitter and the model you want to drive, and the settings for that model are dialed in immediately! The TQi 2.4GHz also features failsafe circuitry and fully adjustable tuning options including exponential, dual rates, endpoints, sub-trim and more. The 2-channel TQi 2.4GHz transmitter is designed to accept an optional Docking Base (#6510) to turn your iPhone or iPod touch into a powerful tuning tool for your Traxxas model. When you combine the TQi transmitter with the accessory Docking Base and a telemetry sensor equipped model, real-time telemetry becomes available through a high-definition, intuitive and customizable dashboard.

  • Sleek 2-channel transmitter with internal antenna
  • 2.4GHz Direct Sequence Spread Spectrum (DSSS) clarity and control
  • Automatically locates and locks onto an open frequency when you switch it on
  • Exclusive Traxxas Link™ automatic model recognition (patent pending)
  • Cross-bind up to 30 Traxxas Link enabled transmitters and receivers for worry-free model management.
  • High output signal for maximum range
  • Simple two-button programming interface:
    • Steering and throttle sensitivity (Expo)
    • Steering and braking dual rate
    • Steering and throttle end points
    • Steering and throttle sub-trim
  • Programmable multi-function knob
  • Integrated fail-safe security
  • Fast 13ms frame rate and 4-17ms latency provides instant response and precise control
  • Two-color status LED
  • Comfortable ergonomic design
  • Telemetry enabled 5-channel micro receiver (#6518) with dual channel-1 inputs
  • No need to carry crystals or select channels
  • Comfortable TQi case design
  • Worry-free long range control
  • 50/50 or 70/30 trigger neutral adjustment
  • Uses only 4 AA batteries
  • Compatible with accessory Docking Base (#6510) (sold separately)
  • Lifetime Electronics Warranty and total Traxxas support.
TQi System 4-channel with 5 ch RX

TQi System 4-channel with 5 ch RX
$80.00

Just switch on and drive with the NEW Traxxas TQi 2.4GHz radio system! With Traxxas spread-spectrum technology, there's no need to check what frequency other drivers are on, or worry about interference from other transmitters. The 2.4GHz circuitry automatically locates and locks onto an open frequency each time you switch it on. The exclusive Traxxas Link™ automatic model recognition software is a breakthrough in "model memory" that makes it easier than ever to enjoy multiple Traxxas Link enabled models without juggling transmitters or scrolling through complex menus searching for model names. Each time the transmitter is bound to a new receiver, it saves that receiver in its memory, along with all the model settings assigned to that receiver. The next time that transmitter and any previously bound receiver (up to 30!) are switched on, the transmitter automatically recalls the settings for that receiver. Just power up the transmitter and the model you want to drive, and the settings for that model are dialed in immediately! The TQi 2.4GHz also features failsafe circuitry and fully adjustable tuning options including exponential, dual rates, endpoints, sub-trim and more. The 4-channel transmitter includes a two-position third channel switch and 3-position fourth channel switch for full compatibility with Traxxas models equipped with reversing transmissions and T-Lock™ differentials. The additional channels are also perfect for operating scale functions, rear-steer options, and other custom controls. The 4-channel TQi 2.4GHz transmitter is designed to accept an optional Docking Base (#6510) to turn your iPhone or iPod touch into a powerful tuning tool for your Traxxas model. When you combine the TQi transmitter with the accessory Docking Base and a telemetry sensor equipped model, real-time telemetry becomes available through a high-definition, intuitive and customizable dashboard.

  • Sleek 4-channel transmitter with internal antenna
  • 2.4GHz Direct Sequence Spread Spectrum (DSSS) clarity and control
  • Automatically locates and locks onto an open frequency when you switch it on
  • Exclusive Traxxas Link™ automatic model recognition (patent pending)
  • Cross-bind up to 30 Traxxas Link enabled transmitters and receivers for worry-free model management.
  • High output signal for maximum range
  • Simple two-button programming interface:
    • Steering and throttle sensitivity (Expo)
    • Steering and braking dual rate
    • Steering and throttle end points
    • Steering and throttle sub-trim
  • Programmable multi-function knob
  • Integrated fail-safe security
  • Fast 13ms frame rate and 4-17ms latency provides instant response and precise control
  • Two-color status LED
  • Comfortable ergonomic design
  • Two-position third channel switch and 3-position fourth channel switch for full compatibility with Traxxas models equipped with reversing transmissions and T-Lock™ differentials
  • Additional channels are also perfect for operating scale functions, rear-steer options, and other custom controls in any R/C model
  • Telemetry enabled 5-channel micro receiver (#6518) with dual channel-1 inputs
  • No need to carry crystals or select channels
  • Comfortable TQi case design
  • Worry-free long range control
  • 50/50 or 70/30 trigger neutral adjustment
  • Uses only 4 AA batteries
  • Compatible with accessory Docking Base (#6510) (sold separately)
  • Lifetime Electronics Warranty and total Traxxas support.
TQi System 4-channel with 5 ch RX and Docking base

TQi System 4-channel with 5 ch RX and Docking base
$100.00

Just switch on and drive with the NEW Traxxas TQi 2.4GHz radio system with Docking Base! The 4-channel TQi 2.4GHz transmitter with Docking Base turns your iPhone or iPod touch into a powerful tuning tool for your Traxxas model. When you combine the TQi Docking Base and a telemetry sensor equipped model, real-time telemetry becomes available through a high-definition, intuitive and customizable dashboard. With Traxxas spread-spectrum technology, there's no need to check what frequency other drivers are on, or worry about interference from other transmitters. The 2.4GHz circuitry automatically locates and locks onto an open frequency each time you switch it on. The exclusive Traxxas Link™ automatic model recognition software is a breakthrough in "model memory" that makes it easier than ever to enjoy multiple Traxxas Link enabled models without juggling transmitters or scrolling through complex menus searching for model names. Each time the transmitter is bound to a new receiver, it saves that receiver in its memory, along with all the model settings assigned to that receiver. The next time that transmitter and any previously bound receiver (up to 30!) are switched on, the transmitter automatically recalls the settings for that receiver. Just power up the transmitter and the model you want to drive, and the settings for that model are dialed in immediately! The TQi 2.4GHz also features failsafe circuitry and fully adjustable tuning options including exponential, dual rates, endpoints, sub-trim and more. The 4-channel transmitter includes a two-position third channel switch and 3-position fourth channel switch for full compatibility with Traxxas models equipped with reversing transmissions and T-Lock™ differentials. The additional channels are also perfect for operating scale functions, rear-steer options, and other custom controls.

  • Sleek Docking Base equipped 4-channel transmitter with internal antenna
  • 2.4GHz Direct Sequence Spread Spectrum (DSSS) clarity and control
  • Automatically locates and locks onto an open frequency when you switch it on
  • Exclusive Traxxas Link™ automatic model recognition (patent pending)
  • Cross-bind up to 30 Traxxas Link enabled transmitters and receivers for worry-free model management.
  • High output signal for maximum range
  • Simple two-button programming interface:
    • Steering and throttle sensitivity (Expo)
    • Steering and braking dual rate
    • Steering and throttle end points
    • Steering and throttle sub-trim
  • Programmable multi-function knob
  • Integrated fail-safe security
  • Fast 13ms frame rate and 4-17ms latency provides instant response and precise control
  • Two-color status LED
  • Comfortable ergonomic design
  • Two-position third channel switch and 3-position fourth channel switch for full compatibility with Traxxas models equipped with reversing transmissions and T-Lock™ differentials
  • Additional channels are also perfect for operating scale functions, rear-steer options, and other custom controls in any R/C model
  • Telemetry enabled 5-channel micro receiver (#6518) with dual channel-1 inputs
  • No need to carry crystals or select channels
  • Comfortable TQi case design
  • Worry-free long range control
  • 50/50 or 70/30 trigger neutral adjustment
  • Uses only 4 AA batteries
  • Lifetime Electronics Warranty and total Traxxas support.
  • Included TQi Docking Base (#6510) Features:
    • Accepts Apple iPhone and iPod touch
    • Height adjustment pads included for iPhone and iPod touch devices with and without cases
    • Secure clamping mechanism holds iPhone or iPod touch in place via three rubber padded cleats
    • Capable of charging Phone or iPod touch
    • Operates on just 4 AA batteries
    • Accepts accessory 5-cell NiMH rechargable battery pack (#3037)
    • Integrated charge jack for use with NiMH batteries
    • TQi Docking Base included on select Traxxas vehicles
  • Traxxas Link Application Features:
    • Available on the App Store
    • Intuitive iPhone and iPod touch interface
    • Customizable Dashboard
      • Dial or digital readout gauges
      • Up to nine gauges can be displayed at one time
      • Set threshold warnings and log maximums, minimums, or averages
      • Review telemetry feedback via the dashboard recording function that includes sound
      • Instant replay feature captures the previous 60-seconds of dashboard activity
      • Recordings can be named and saved
      • See telemetry feedback from electric and nitro models for speed, temperature, and voltage
    • Edit, save, and share drive profiles
    • Visually manage an unlimited number of models with the Traxxas Link App and see:
      • Transmitter model history
      • Model names
      • Customizable settings
      • Profiles
Recommended Items for the 1/16 Slash VXL 4WD
Power Cell Series 1 NiMH 7.2V

Power Cell Series 1 NiMH 7.2V
$24.50

Stock up on high-quality Traxxas Series 1 battery packs to extend your run time—or install two Series 1 packs in your 1/16 brushless machine and unleash its full 50+mph speed potential! Series 1 Power Cell packs feature rugged construction, flexible silicone-jacketed wires and Traxxas' exclusive High-Current Connector for total efficiency and performance.
Parallel Battery Connector

Parallel Battery Connector
$8.00

Instantly double your 1/16 model's run time with a second battery pack and a Traxxas parallel connector. When installed in your model, the connector combines the batteries' capacity for extra-long run times without compromising performance.
Series Battery Connector

Series Battery Connector
$8.00

Unleash the beast! The Traxxas series connector combines the voltages of two Series 1 battery packs to pump 14.4 volts of electric adrenaline into your 1/16 VXL model. Squeeze the trigger and hold on as the fun meter pegs the needle at 50+mph! Note: Series Connector is for use with the VXL-3m brushless system only and is not compatible with the stock XL-2.5 speed control and Titan 380 motor.