Traxxas
Upgrading the Bandit XL-5
TQi System 2-channel with 5 ch RX

TQi System 2-channel with 5 ch RX
$67.50

Just switch on and drive with the NEW Traxxas TQi 2.4GHz radio system! With Traxxas spread-spectrum technology, there's no need to check what frequency other drivers are on, or worry about interference from other transmitters. The 2.4GHz circuitry automatically locates and locks onto an open frequency each time you switch it on. The exclusive Traxxas Link™ automatic model recognition software is a breakthrough in "model memory" that makes it easier than ever to enjoy multiple Traxxas Link enabled models without juggling transmitters or scrolling through complex menus searching for model names. Each time the transmitter is bound to a new receiver, it saves that receiver in its memory, along with all the model settings assigned to that receiver. The next time that transmitter and any previously bound receiver (up to 30!) are switched on, the transmitter automatically recalls the settings for that receiver. Just power up the transmitter and the model you want to drive, and the settings for that model are dialed in immediately! The TQi 2.4GHz also features failsafe circuitry and fully adjustable tuning options including exponential, dual rates, endpoints, sub-trim and more. The 2-channel TQi 2.4GHz transmitter is designed to accept an optional Docking Base (#6510) to turn your iPhone or iPod touch into a powerful tuning tool for your Traxxas model. When you combine the TQi transmitter with the accessory Docking Base and a telemetry sensor equipped model, real-time telemetry becomes available through a high-definition, intuitive and customizable dashboard.

  • Sleek 2-channel transmitter with internal antenna
  • 2.4GHz Direct Sequence Spread Spectrum (DSSS) clarity and control
  • Automatically locates and locks onto an open frequency when you switch it on
  • Exclusive Traxxas Link™ automatic model recognition (patent pending)
  • Cross-bind up to 30 Traxxas Link enabled transmitters and receivers for worry-free model management.
  • High output signal for maximum range
  • Simple two-button programming interface:
    • Steering and throttle sensitivity (Expo)
    • Steering and braking dual rate
    • Steering and throttle end points
    • Steering and throttle sub-trim
  • Programmable multi-function knob
  • Integrated fail-safe security
  • Fast 13ms frame rate and 4-17ms latency provides instant response and precise control
  • Two-color status LED
  • Comfortable ergonomic design
  • Telemetry enabled 5-channel micro receiver (#6518) with dual channel-1 inputs
  • No need to carry crystals or select channels
  • Comfortable TQi case design
  • Worry-free long range control
  • 50/50 or 70/30 trigger neutral adjustment
  • Uses only 4 AA batteries
  • Compatible with accessory Docking Base (#6510) (sold separately)
  • Lifetime Electronics Warranty and total Traxxas support.
TQi System 4-channel with 5 ch RX

TQi System 4-channel with 5 ch RX
$80.00

Just switch on and drive with the NEW Traxxas TQi 2.4GHz radio system! With Traxxas spread-spectrum technology, there's no need to check what frequency other drivers are on, or worry about interference from other transmitters. The 2.4GHz circuitry automatically locates and locks onto an open frequency each time you switch it on. The exclusive Traxxas Link™ automatic model recognition software is a breakthrough in "model memory" that makes it easier than ever to enjoy multiple Traxxas Link enabled models without juggling transmitters or scrolling through complex menus searching for model names. Each time the transmitter is bound to a new receiver, it saves that receiver in its memory, along with all the model settings assigned to that receiver. The next time that transmitter and any previously bound receiver (up to 30!) are switched on, the transmitter automatically recalls the settings for that receiver. Just power up the transmitter and the model you want to drive, and the settings for that model are dialed in immediately! The TQi 2.4GHz also features failsafe circuitry and fully adjustable tuning options including exponential, dual rates, endpoints, sub-trim and more. The 4-channel transmitter includes a two-position third channel switch and 3-position fourth channel switch for full compatibility with Traxxas models equipped with reversing transmissions and T-Lock™ differentials. The additional channels are also perfect for operating scale functions, rear-steer options, and other custom controls. The 4-channel TQi 2.4GHz transmitter is designed to accept an optional Docking Base (#6510) to turn your iPhone or iPod touch into a powerful tuning tool for your Traxxas model. When you combine the TQi transmitter with the accessory Docking Base and a telemetry sensor equipped model, real-time telemetry becomes available through a high-definition, intuitive and customizable dashboard.

  • Sleek 4-channel transmitter with internal antenna
  • 2.4GHz Direct Sequence Spread Spectrum (DSSS) clarity and control
  • Automatically locates and locks onto an open frequency when you switch it on
  • Exclusive Traxxas Link™ automatic model recognition (patent pending)
  • Cross-bind up to 30 Traxxas Link enabled transmitters and receivers for worry-free model management.
  • High output signal for maximum range
  • Simple two-button programming interface:
    • Steering and throttle sensitivity (Expo)
    • Steering and braking dual rate
    • Steering and throttle end points
    • Steering and throttle sub-trim
  • Programmable multi-function knob
  • Integrated fail-safe security
  • Fast 13ms frame rate and 4-17ms latency provides instant response and precise control
  • Two-color status LED
  • Comfortable ergonomic design
  • Two-position third channel switch and 3-position fourth channel switch for full compatibility with Traxxas models equipped with reversing transmissions and T-Lock™ differentials
  • Additional channels are also perfect for operating scale functions, rear-steer options, and other custom controls in any R/C model
  • Telemetry enabled 5-channel micro receiver (#6518) with dual channel-1 inputs
  • No need to carry crystals or select channels
  • Comfortable TQi case design
  • Worry-free long range control
  • 50/50 or 70/30 trigger neutral adjustment
  • Uses only 4 AA batteries
  • Compatible with accessory Docking Base (#6510) (sold separately)
  • Lifetime Electronics Warranty and total Traxxas support.
TQi System 4-channel with 5 ch RX and Docking base

TQi System 4-channel with 5 ch RX and Docking base
$100.00

Just switch on and drive with the NEW Traxxas TQi 2.4GHz radio system with Docking Base! The 4-channel TQi 2.4GHz transmitter with Docking Base turns your iPhone or iPod touch into a powerful tuning tool for your Traxxas model. When you combine the TQi Docking Base and a telemetry sensor equipped model, real-time telemetry becomes available through a high-definition, intuitive and customizable dashboard. With Traxxas spread-spectrum technology, there's no need to check what frequency other drivers are on, or worry about interference from other transmitters. The 2.4GHz circuitry automatically locates and locks onto an open frequency each time you switch it on. The exclusive Traxxas Link™ automatic model recognition software is a breakthrough in "model memory" that makes it easier than ever to enjoy multiple Traxxas Link enabled models without juggling transmitters or scrolling through complex menus searching for model names. Each time the transmitter is bound to a new receiver, it saves that receiver in its memory, along with all the model settings assigned to that receiver. The next time that transmitter and any previously bound receiver (up to 30!) are switched on, the transmitter automatically recalls the settings for that receiver. Just power up the transmitter and the model you want to drive, and the settings for that model are dialed in immediately! The TQi 2.4GHz also features failsafe circuitry and fully adjustable tuning options including exponential, dual rates, endpoints, sub-trim and more. The 4-channel transmitter includes a two-position third channel switch and 3-position fourth channel switch for full compatibility with Traxxas models equipped with reversing transmissions and T-Lock™ differentials. The additional channels are also perfect for operating scale functions, rear-steer options, and other custom controls.

  • Sleek Docking Base equipped 4-channel transmitter with internal antenna
  • 2.4GHz Direct Sequence Spread Spectrum (DSSS) clarity and control
  • Automatically locates and locks onto an open frequency when you switch it on
  • Exclusive Traxxas Link™ automatic model recognition (patent pending)
  • Cross-bind up to 30 Traxxas Link enabled transmitters and receivers for worry-free model management.
  • High output signal for maximum range
  • Simple two-button programming interface:
    • Steering and throttle sensitivity (Expo)
    • Steering and braking dual rate
    • Steering and throttle end points
    • Steering and throttle sub-trim
  • Programmable multi-function knob
  • Integrated fail-safe security
  • Fast 13ms frame rate and 4-17ms latency provides instant response and precise control
  • Two-color status LED
  • Comfortable ergonomic design
  • Two-position third channel switch and 3-position fourth channel switch for full compatibility with Traxxas models equipped with reversing transmissions and T-Lock™ differentials
  • Additional channels are also perfect for operating scale functions, rear-steer options, and other custom controls in any R/C model
  • Telemetry enabled 5-channel micro receiver (#6518) with dual channel-1 inputs
  • No need to carry crystals or select channels
  • Comfortable TQi case design
  • Worry-free long range control
  • 50/50 or 70/30 trigger neutral adjustment
  • Uses only 4 AA batteries
  • Lifetime Electronics Warranty and total Traxxas support.
  • Included TQi Docking Base (#6510) Features:
    • Accepts Apple iPhone and iPod touch
    • Height adjustment pads included for iPhone and iPod touch devices with and without cases
    • Secure clamping mechanism holds iPhone or iPod touch in place via three rubber padded cleats
    • Capable of charging Phone or iPod touch
    • Operates on just 4 AA batteries
    • Accepts accessory 5-cell NiMH rechargable battery pack (#3037)
    • Integrated charge jack for use with NiMH batteries
    • TQi Docking Base included on select Traxxas vehicles
  • Traxxas Link Application Features:
    • Available on the App Store
    • Intuitive iPhone and iPod touch interface
    • Customizable Dashboard
      • Dial or digital readout gauges
      • Up to nine gauges can be displayed at one time
      • Set threshold warnings and log maximums, minimums, or averages
      • Review telemetry feedback via the dashboard recording function that includes sound
      • Instant replay feature captures the previous 60-seconds of dashboard activity
      • Recordings can be named and saved
      • See telemetry feedback from electric and nitro models for speed, temperature, and voltage
    • Edit, save, and share drive profiles
    • Visually manage an unlimited number of models with the Traxxas Link App and see:
      • Transmitter model history
      • Model names
      • Customizable settings
      • Profiles
VXL-3S ESC and Velineon 3500 Motor

VXL-3S ESC and Velineon 3500 Motor
$165.00

The Velineon® VXL-3s forward/reverse electronic speed control simplifies brushless technology with easy, built-in profiles and intuitive programming. Tri-mode operation auto detects the motor type for brushed, sensored or sensorless brushless motors. The VXL-3s™ uses advanced circuit design that allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. It sets up, operates, and programs just like the Traxxas XL-5™ family of ESCs so there's no tricky new procedures to learn. Traxxas' exclusive patent-pending Training Mode™ is also included to limit full throttle to 50% for young or inexperienced drivers. For the most advanced users, the VXL-3s is equipped with two-stage low voltage detection to allow LiPo battery use, including powerful 11.1-volt 3S packs!

VXL-3S

  • The VXL-3s auto-detects the motor type for brushless and sensored brushless motors.
  • Traxxas High-Current Connector eliminates a common bottleneck and maintains pure, unrestricted power flow from the battery to the brushless power system.
  • Built-in two-stage low voltage detection for Lithium Polymer (LiPo) battery use provides a clear signal to the driver that the battery pack is nearing its minimum voltage threshold.
  • Widest range of battery options ranging from 4-cell NiMH or NiCad packs all the way up to 3S LiPo battery packs (11.1 volt)
  • The patent-pending Training Mode™ is an exclusive Traxxas feature that reduces the overall power output of the VXL-3s by 50%, making it easier for new or younger drivers to control their model. When they're ready, simply change profiles to unleash full-throttle action.
  • Advanced circuit design allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. There.s no need for additional sensor wiring and hardware complexity.
  • The EZ-Set® push-button setup operates and programs just like other Traxxas speed controls such as the XL-5. This eliminates the need to learn a new set of procedures.
  • The VXL-3s is programmable with three drive profiles:
    • Sport Mode — Fwd / Brake / Rev
    • Race Mode — Fwd / Brake
    • Training Mode™ — 50% Fwd / Brake / 50% Rev
  • Multi-color LED provides clear feedback
  • Since the VXL-3s allows experimentation with many kinds of motors, it is equipped with numerous failsafe features to help protect against common mishaps that can cause other systems to fail.
    • Two-stage thermal shutdown protection protects the VXL-3s from overheating.
    • Locked Rotor Protection™ prevents system damage by cutting power if the vehicle is stuck or the motor is bound.
    • Sensor Phase Detection™ protects against improperly wiring aftermarket sensored motors.
    • Sensored Motor Backup protection causes the VXL-3s to switch to sensorless operation if a motor sensor fails or sensor wires become disconnected. Sensored motors can be used without connecting the sensor wires to the sensor port on the ESC.
    • Battery Over-Voltage Protection™ causes the ESC to go into failsafe mode if the maximum input voltage is exceeded.
  • Water resistent case design uses rubber seals and o-rings to protect against damage caused by water and moisture.
  • Micro-fin aluminum heatsink dissipates heat.
  • The built-in auxiliary fan output powers a snap-on accessory fan for increased cooling capacity during extreme use. A handy clasp on the speed control case keeps the wire neatly in place until you are ready to use it.
  • MOSFET design provides high-current output (320 amp peak) with incredibly low resistance (.00075 Ω (ohm)).
  • Gold plated 3.5mm bullet connectors on 12-gauge Maxx® Cable flow full power to the motor without performance strangling resistance.

Velineon 3500

  • Ultra high-temperature sintered Neodymium magnets provide massive torque and linear power
  • Optimized for power and efficiency in 1/10th scale vehicles
  • Consistent, high-power output, run after run
  • Low-maintenance, unique Traxxas design
  • Efficient, high-speed ball bearings
  • Low maintenance design
  • Precision-balanced rotor
  • Solder tabs
  • Protective end cap
  • 10-Turn, 3500kV
  • Rebuildable
  • Hex hardware
  • Brilliant blue-anodizing finish
  • Silicon steel laminations
  • Delivers more power than comparable brushed motors